Configuring Handhelds; Checking Battery Status; Recharging The Handheld - Texas Instruments ti nspire cx Manual Book

Configuring Handhelds

This chapter provides information needed to:
• Maintain batteries used in the handheld.
• Change the default settings.
• Attach a wireless module when the handheld is used in the classroom.

Checking Battery Status

To check the status of the TI-Nspire™ Rechargeable Battery in a handheld:
c
1. Press .
The Home screen opens.
5 4
2. Press
The Handheld Status dialog box opens.
3. Click OK or press
From an open document, press
Note:

Recharging the Handheld

To recharge the TI-Nspire™ Rechargeable Battery in a handheld, connect it to any of
the following power sources:
• A standard USB cable connected to a computer
• A TI USB wall charger (sold separately)
• A TI-Nspire™ CX Docking Station if in a classroom setting
( Settings > Status ).
·
to close the window.
~ 7 4 ~
(
Battery status is shown here.
> Settings & Status > Status ).
Configuring Handhelds 71