Texas Instruments ti nspire cx Manual Book page 66

2. To attach the handheld, face the screen upward and slide the handheld onto the
top of the cradle. Be sure that both sides of the handheld are inserted into both of
the side guides.
3. Press firmly to make a good connection. When properly connected, the handheld
appears to be sitting on top of the cradle.
4. Lock the handheld in place by sliding the lock on the back of the cradle to the ON
position.
66 Working in a TI-Nspire™ CX Navigator™ Teacher Software Classroom
Lock in OFF position.