Texas Instruments ti nspire cx Manual Book page 77

e
2. Press to move through the list of settings. Press
through the list.
A bold line around a box indicates it is active.
3. When you reach the desired setting, press
values for each setting.
4. Press the 5 and 6 keys to highlight the desired option, then press
select the value.
5. Click OK or press
The Home screen opens and the new settings are only applied to the open
document.
To apply the new settings to the open document and to documents created in the
future:
• Select Make Default and press
• Click OK to apply the settings to any open documents and save the settings as
defaults for new documents and for Scratchpad.
Restoring Document Settings
Complete the following steps to restore the original factory settings to open or new
documents, and to the Scratchpad.
1. From the Home screen, press
The Document Settings dialog box opens.
2. Use the Touchpad or press
The Restore Defaults dialog box opens.
x ·
or to apply the new settings only to the open document.
5 2
e
to select Restore , and then press
¢
to open the drop-down list to view
x ·
or .
( Settings > Document Settings ).
£
to move backward
x
or
·
.
Configuring Handhelds
·
to
77