Connecting The Handhelds To The Wireless Adapters - Texas Instruments TINSPIRE Manual Book

3. Enter a nickname in the
Nicknames can consist of letters, spaces, and numbers. A nickname
must contain a minimum of 1 character and can contain a maximum
of 64 characters.
4. Click
Add Next
than one wireless client to add.
5. When you are finished adding all of the adapters and cradles, click
.
Finish
Removing adapters or cradles from an existing network
Even though a classroom network has been set up correctly, sometimes
you may need to remove TI-Nspire™ Navigator™ Wireless Network
Adapters or TI-Nspire™ Navigator™ Cradles from the network.
You might need to remove adapters or cradles because your access point
has been associated with wireless clients that should belong to another
classroom.
1. In the TI-Nspire™ Network Manager window, select the wireless
adapters and cradles that you want to remove from the network.
2. Click
Actions > Remove Selected
3. Click
Remove
The wireless client is no longer listed in the Network Manager
window.
Connecting the handhelds to the wireless
adapters
The TI-Nspire™ CX wireless network adapters work with the TI-Nspire™
CAS and TI-Nspire™ CX CAS handhelds. To connect the handheld to the
wireless adapter, follow these steps.
1. Position the wireless adapter on top of the handheld so the connector
on the adapter lines up with the connector on top of the handheld.
14 Setting up the TI-Nspire™ Navigator™ Teacher Software
Wireless Client Nickname
to add another adapter or cradle if you have more
at the prompt.
or click .
box (optional).