Replacing Ti-Nspire™ Rechargeable Batteries - Texas Instruments ti nspire cx Manual Book

The Handheld Status screen opens.
2. Click About to view details about the handheld.
3. Click OK to close the About dialog box.
4. Click OK to return to the Home screen.
Replacing TI-Nspire™ Rechargeable Batteries
When you replace the battery, complete the following steps to insert the TI-Nspire™
Rechargeable Battery into a handheld.
Your handheld may not exactly match these illustrations. Some models use a
Note:
battery with a connector attached by wires. Other models use a battery with the
connector built into the battery.
1. Use a small screwdriver to release the panel from the back of the handheld.
2. Remove the panel.
Configuring Handhelds 81