Connecting The Cables To A 9416 Printer - Paxar Model 9416 User Manual

C o n n e c t i n g t h e C a b l e s t o a 9 4 1 6 P r i n t e r
1. Turn OFF the printer before you connect the keyboard's cable.
2. Plug the 9-pin coiled keyboard cable into the end of the adaptor
cable.
ON/OFF
Sw itch
Adaptor
Cable
Pow er
Connector
Keyboard
Pow er Supply (5V)
3. Secure the other end of the adaptor cable to the 9-pin port on the
printer. Tighten the screws on the cables.
4. Connect the power cord to the power supplies.
5. Connect the power supply (24V) to the printer.
6. Connect the small power supply (5V) to the adaptor cable's power
connector.
7. Turn ON the printer. The keyboard receives power from the auxiliary
power supply (5V).
Optional Scanner
Cable
Keyboard
Cable goes here
Printer's
Pow er Supply
(24V)
Pow er
Cords
Introduction 1-3