Step 6: Installing The Printers; Attach The Printer Brackets - Paxar Mobile Printing Station Monarch 9476 Assembly And Setup Instructions

9476 Assembly and Setup Instructions
10. Plug the heavy-duty power cord into the external power
Do Not plug the external power cord into a wall outlet until you
n
are ready to charge the battery. See "Charging the Battery"
for important battery information.
11. Close and lock the cabinet.
Do Not store anything inside the cabinet other than the battery
and battery charger. The cabinet must remain locked at all
times and the key must be stored with qualified service
personnel.

Step 6: Installing the Printers ----------------------------------------------------------------

Follow the steps below to attach the printer brackets and
printers to the Station.

Attach the Printer Brackets

1. Remove the following items from their packaging:
1-22
socket on the outside panel of the Station. (Figure 15.)
printer brackets (1-4, depending on your system)
M4 x 8mm phillips sems screws and M4 nuts (4-16 of
each, depending on how many printers you have)
(2) M3.5 x 10mm slotted shoulder screws per printer
(2) M3.5 washers per printer