Connecting Supplies; Rewinding On The Hub - Paxar Rewind Monarch 415 Operator's Handbook Manual

2. Connecting Supplies

Rewinding on the Hub

1. Slide the supply guide away from the hub flange and pull it
away from the hub.
2. Print or feed enough supplies from the printer to wrap
around the hub one and one half times.
3. Hold the hub flange and twist the hub clockwise until it
stops.
4. Thread the supply strip under the dancer roller.
5. Fold and insert the end of the supply strip into the slot
(Figure 3). Be sure the supply is against the hub flange.
Hub
Flange
Slot
Dancer
Roller
Figure 3
Supply
Strip
Supply
Guide
3