3. Using the Device
2.
Press the [START/STOP] button.
The arm cuff will automatically start to inflate.
START
3.
Remove the arm cuff.
4.
Press the [START/STOP] button to turn the monitor off.
The monitor automatically stores the measurement result in its memory.
It will automatically turn off after 2 minutes.
Note:
Wait 2-3 minutes before taking another measurement. Waiting between measurements allows
the arteries to return to their prior condition to taking a measurement.
16
INFLATING
DEFLATING
Cuff Wrap Guide Lamp
COMPLETED
What to do if your systolic
pressure is more than 210 mmHg
After the arm cuff starts to inflate, press and
hold the [START/STOP] button until the
monitor inflates 30 to 40 mmHg higher than
your expected systolic pressure.
Notes:
• The monitor will not inflate above 299 mmHg.
Inflating to a higher pressure than
necessary may result in bruising of the
arm where the arm cuff is applied.