Omron M7 Intelli IT Instruction Manual page 16

2. Preparation
To Set the Date and Time Manually
The date and time will be automatically set when paired with your smartphone. To
set manually, follow the instructions below.
1.
Press the connection
The connection symbol (
monitor.
Note:
If pairing has not been completed, the display to the right will not appear.
Please continue to step 3 and skip step 2.
2.
Then press the connection button again.
The year flashes on the Date/Time display.
3.
Push or button to change the year.
Push
steps to change the month, day, hour, and minute.
Year
Change
: Back
4.
Press the [START/STOP] button to turn the monitor off.
12
) and the "
button to confirm the year and then the month flashes. Repeat the same
Month
Confirm Change Confirm
: Forward
button once.
" flash on the display of the
Day Hour
Change Confirm Change
Minute
Confirm Change Confirm