Check The Position Of The Detergent Flap; Setting A Programme; Starting A Programme - John Lewis JLWM1407 User Manual

Always follow the instructions that you find on the packaging of the detergent products,
but we recommend that you do not exceed the maximum indicated level (
quantity will however guarantee the best washing results.
After a washing cycle, if necessary, remove any detergent residue from the detergent
dispenser.
Check the position of the
detergent flap
1. Pull out the detergent dispenser until it stops.
2. Press the lever down to remove the dispenser.
3. To use powder detergent, turn the flap up.
4. To use liquid detergent, turn the flap down.
With the flap in the position DOWN:
• Do not use gelatinous or thick liquid
detergents.
• Do not exceed to liquid detergent dose
indicated on the flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Washing Machine User Manual
Make sure that the flap does not cause a
blockage when you close the drawer.

Setting a programme

1. Turn the programme dial to select the desired
washing programme.
The indicator of the Start/Pause button flashes.
The display shows an indicative programme
duration.
2. To change the temperature and/or the spin
speed, touch the related buttons.
3. If desired, set one or more options by touching
the related buttons. The related indicators
illuminate on the display and the given
information changes accordingly.
If a selection is not possible an
acoustic signal sounds.

Starting a programme

Touch the Start/Pause button to start the
programme.
The related indicator stops flashing and stays on.
The programme starts, the door is locked. The
display shows the indicator
). This
.
25