Electrical Connection - Miele PG 8164 Operating Instructions Manual

18.2 Electrical connection

In the dishwashing machine's plinth there is a transfer strip for connecting an external detergent dosing
device.
The transfer strip can be assigned various signals depending on how parameter P704 is set. The technician
who connects the detergent dosing device sets parameter P704 when installing the machine.
How to make parameter P704 accessible:
 Enter the PIN menu
 Press the button
 Screen 14 appears.
IMPORTANT maximum current drain at the connector strip: 0.5 A.
a) Door closed
b) Minimum water level in the tank
c) Not in the self-cleaning programme
d) Not while the machine is filling
e) Not in descaling or basic cleaning programme
Possible settings
P704 Use
0 for dispenser pumps installed outside the machine
1 for dispenser pumps installed outside the machine
3 for internal dispenser pumps
 Use the scroll buttons to set the value for parameter
P704.


Screen 14

Terminal Voltage is on
L1 Continuous voltage
N
while the machine is filling
parallel to solenoid valve
Fill
 while the machine is
filling
 during rinsing
while the circulating pump is
Wash
running
External dispenser pumps
PIN 1575
0: Voltage to the "Wash" terminal when the circulat-
ing pump frequency inverter is active.
Tension at the "Fill" terminal during the first filling of
the tank.
1: Voltage to the "Fill" terminal when the inlet sole-
noid valve is active.
3: For pulse-controlled dosing device (e.g. Fluidos)
Condition
P704=0
a), b)
P704=1
a)
P704=0
a)
GB
Restriction
c)
c), d), e)
67