Changing The Amount Of Detergent / Rinse Aid; Resetting The Water Countdown Indicator - Miele PG 8164 Operating Instructions Manual

PIN menu

12.6 Changing the amount of detergent / rinse aid

When a new detergent or rinse aid is used, it may be necessary to change the dosing amount. Please
observe the dosing recommendations on the packing.
The dosing amount can be adjusted separately for every standard programme.
IMPORTANT In the next menu, only the dosing amount of the internal dispenser pumps is changed.
Please consult the corresponding device documents for external dispenser pumps.
Opening the menu
 Press the button.
Changing the detergent dosing amount
 Select a wash programme: press one of the three buttons (1).
INFO - The display of the three pictograms depends on the type of commercial dishwasher.
- The dosing amounts for each wash programme can be set separately.
 The background of the selected button (1) and button (4) changes to white.
 The current detergent dosing amount and the internal name (P003) is displayed in field (3).
 Change the dosing amount with the scroll buttons (2).
 Press the button (5) in order to save the entry.
 Button (5) lights up briefly in white.
Changing the rinse aid dosing amount
 Press the button.
 The background of the button becomes white.
 The remaining steps are much the same as the steps for changing the detergent dosing amount.
Therefore, proceed as in the section "Changing the detergent dosing amount".
 Press the back button to exit from the menu.

12.7 Resetting the water countdown indicator

The requirements for using this function are as follows:
 External water treatment which has a certain capacity (e.g. water volume of 15 m³) and is then exhausted
 The capacity is entered in the machine electronics by the service technician
As soon as the volume of water entered in the machine electronics has been used up, the symbol
shown to the left will appear.
Once the external water treatment has been replaced, the water back-flow counter must be reset:
 Tap the following buttons in turn:
 Press the back button to exit from the menu.
60