Suzuki VZR1800/BZ Owner's Manual page 95

4. Draw out the axle.
5. Remove the wheel from the
splined drive gear and set the
wheel assembly on the ground.
6. Remove the rear wheel assembly.
7. To replace the wheel reverse the
complete sequence listed.
 WARNING
If the bolts and nuts are not prop-
erly tightened, the wheel can
come off, causing an accident.
Be sure to tighten the bolts and
nuts to the specified torque. If you
do not have a torque wrench or do
not know how to use one, ask
your authorized Suzuki dealer to
check the bolts and nuts.
Rear axle tightening torque:
110 N·m (11.0 kgf-m, 79.5 lbf-ft)
Rear brake caliper bracket
mounting bolt tightening torque:
94 N·m (9.4 kgf-m, 68.0 lbf-ft)
NOTE: Apply a drop of SUZUKI
THREAD LOCK "1322D" to the rear
brake mounting bolt.
6-43