Suzuki VZR1800/BZ Owner's Manual page 74

Mark top dead center
In the position at
which the filter
gasket first contacts
the mounting
surface.
Tighten the filter 2 turns or
to specified torque.
9. Mark the top dead center position
on the "cap type" filter wrench or
on the oil filter. Use an oil filter
wrench to tighten the filter 2 turns
or to specified torque.
Oil filter tightening torque:
20 N·m (2.0 kgf-m, 14.5 lbf-ft)
Oil filter wrench
10. Replace the gaskets with new
ones. Reinstall the drain plugs
and gaskets. Tighten the plug
securely with a torque wrench.
Pour about 3000 ml (3.2/2.8 US/
Imp qt) of the specified oil in the
filler hole. Tighten the oil filler cap.
Start the engine and allow it to idle
for a few minutes.
Drain plug tightening torque:
23 N·m (2.3 kgf-m, 16.5 lbf-ft)
11. Remove the oil filler cap. Pour
remaining engine oil in the filler
hole. Tighten the oil filler cap.
Start the engine and allow it to idle
for a few minutes.
NOTE: About 3600 ml (3.8/3.2 US/
Imp qt) of oil will be required when the
engine oil and oil filter are changed.
About 3400 ml (3.6/3.0 US/Imp qt) of
oil will be required when changing oil
only.
6-22