Suzuki VZR1800/BZ Owner's Manual page 21

Table of Contents

Advertisement

When
the
display
"CHEC", check following items;
Make sure that the engine stop
switch is in the "" position.
Make sure that the transmission is
in neutral or the side stand is fully
up.
If the display still indicates "CHEC"
after checking the above items,
inspect the ignition fuse and the con-
nection of the lead wire couplers.
OIL PRESSURE INDICATOR LIGHT/
COOLANT TEMPERATURE
INDICATOR LIGHT "
This indicator light comes on in the
display when the engine oil pressure
is below the normal operating range,
coolant temperature is too high. This
indicator should come on when the
engine is not running. As soon as the
engine starts, this indicator should go
out.
Oil Pressure
With the ignition switch in the "ON"
position but the engine is not started,
the symbol "" 3 in the display
and the indicator light 9 comes on.
D
indicates
" 9
2-9
NOTICE
Riding the motorcycle with the oil
pressure indicator light lit can
damage the engine and transmis-
sion.
If the oil pressure indicator light
comes on, indicating low oil pres-
sure, stop the engine immediately.
Check the oil level and add oil if
necessary. If there is a proper
amount of oil and the light still
does not go out, have your autho-
rized Suzuki dealer or a qualified
mechanic inspect your motorcy-
cle.
Coolant Temperature
When the coolant temperature is
higher than 120°C, the symbol ""
3 and indicator light 9 come on.
When the coolant temperature indica-
tor light comes on, stop the engine
and check the coolant level after
engine cools.
NOTICE
Riding the motorcycle with the
coolant temperature indicator lit
can cause serious engine damage
due to overheating.
If the engine coolant temperature
indicator light comes on, stop the
engine to let it cool. Do not run the
engine until the coolant tempera-
ture indicator light goes off.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents