REAR WHEEL REMOVAL
NOTICE
Removing the rear wheel without
use of an accessory stand can
result in your motorcycle falling
over and being damaged.
Do not attempt roadside removal
of the rear wheel. Only remove the
rear wheel at a properly equipped
servicing facility using an acces-
sory service stand.
1. Place the motorcycle on the side
stand.
2. Remove the bolt 1. Remove the
axle nut 2.
CAUTION
A hot muffler can burn you.
Wait until the muffler cools before
removing the axle nut.
3. Place an accessory service stand
or equivalent under the swingarm
or chassis tubes to stabilize the
rear end.
6-42