Sleep; High Efficient Run Function; Mute Function; Prevent Cooling Wind Mode - WINTAIR WAW-24/INV Technical And Service Manual

6 . C O N T R O L M
6 . C O N T R O L M
will start in the timer off condition. When the set time is up, the air conditioner will turn off
after receiving a signal from the remote controller. If the air conditioner has not received a
signal from the remote controller when the set time is up, it will turn off automatically.
3. Neither the turning on nor turning off operation will cancel the timer function。

2.4 Sleep

1. In the heating, cooling or dehumidifying mode, press the "Sleep" button on the remote
controller to start or cancel the sleep function in turn, and at the same time the sleep icon on
the display screen will be on or off accordingly.
2. In the heating mode, the set temperature will decrease automatically after the sleep
function is started.
3. In the cooling mode, the set temperature will rise automatically after the sleep function
is started.
4. In default, the setting is to cancel the sleep function. Turning off the unit will also
cancel the sleep function.

2.5 High efficient run function

In Cool, Dehumidification, Fan mode, press the "HIGH POWER " to enter the
refrigeration mode, set the temperature automatically adjust to 18℃; the Fan speed is
powerful speed; frequency of high frequency operation.
In the heating mode, powerful function is invalid for H1 wireless remote controller.
2.6 mute function (only for H1 wireless remote controller)
In the indoor machine operation mode，You may turn on mute function and turn off mute
function by mute key, The air conditioner will run by mute fan speed in mute mode

2.7 prevent cooling wind mode

In the heating-run, to prevent the indoor fan from blowing cold air, the indoor fan will stop
or run slowly until the coil is warmth.
2.8 blow waste heating and waste cooling function
DC INVERTER AIR CONDITIONER TECHNICAL& SERVICE MANUAL V3.3
O D E L
O D E L
83