Static Pressure Setting(Only For Duct Type) - WINTAIR WAW-24/INV Technical And Service Manual

5 . E L E C T R I C A L D A T A
5 . E L E C T R I C A L D A T A
5-5. Static Pressure Setting (only for duct type)
CHANGE OF STATIC PRESSURE
The static pressure outside the indoor unit can be chosen .
Models except DC FAN MOTERS(AUD-24UX4SALH1 & AUD-36UX4SAMH1) :
You can change the static pressure by changing the fan motor terminal which refer to following
Fig.below:
FOR DC FAN MOTER DUCT AIR CONDITIONERS(AUD-24UX4SALH1 & AUD-36UX4SAMH1) :
Default static pressure is 30 Pa.
The static pressure can be freely adjusted from 1 Pa to 80 Pa by using specific wire remote
controller(YXE-C01U/YXE-C02U).
Operation details, please refer to 5.6 System Parameter Adjustment .
If you still have any trouble, please contact local technical service center of our company for
further information.
DC INVERTER AIR CONDITIONER TECHNICAL& SERVICE MANUAL V3.3
71
71