Sharp PC-1403 Operation Manual page 128

122
Lists the statements between line numbers 100 and 200. LUST 100,200
LUST "label",
If a password has been set, the LLIST command is ignored.
••MM
The LUST command may be used in the PROgram or RUN mode.
The first format prints all of the programs in memory.
The second format prints only the program line whose line number is given by the
expression.
The third format prints the statements from the line number with the nearest line equal
to or greater than the value of expression 1 to the nearest line equal to or greater than
the value of expression 2. There must be at least two lines between the two numbers.
The fourth format prints all program lines beginning with the line whose number is given
by the expression.
The fifth format prints all program lines up to, and including, the line whose number is
given by the expression.
• When programs are merged with the MERGE command, the LUST command
functions for the last program. To list a program stored earlier, execute:
The LUST command is used for printing a program on the optional printer.
1 LLIST
2 LLIST expression
3 LLIST expression 1 , expression 2
4 LUST expression,
5 LUST, expressi o n
Abbreviations: LL., LU., LLIS.
See also: LIST
Commands
LLIST