Sharp PC-1403 Operation Manual page 111

105
If you intend to use a cassette tape recorder, the following are the minimum tape
recorder requirements for interfacing with the CE-126P:
_Cassette Tape Recorder
Connecting the CE-126P to a tape recorder
Only these three connections are necessary:
1. Red plug into the MICrophone jack on the cassette recorder.
2. Gray plug into the EARphone jack on the cassette recorder.
3. Black plug into the REMote jack on the cassette recorder.
Using this cassette interface will allow you to store programs and data from the
computer onto cassette tape. Once on tape, you can load these programs and
data back into the computer with a simple procedure.
Using Cassette Interface
• When the printer is exposed to strong external electrical noise, it may print numbers
at random. If this happens, depress the ~ key to stop the printing. Turn the CE-
126P power off and on, and then press the Im] key.
Pressing the Im] key will return the printer to its normal condition.
• When the printer causes a paper jam or is exposed to strong external electrical noise
while printing, it may not operate normally and only the symbol "BUSY" is
displayed. If this happens, depress the ~ key to stop printing. (Remove the
paper jam.) Turn the CE-126P power off and on, and then press the ~ key.
• When the CE-126P is not in use, turn off the printer switch to conserve the battery
life.
Using the Options