8" Water Softener With Soft-Minder ® 30 Water Softener Pds - Culligan Medallist Series Owner's Manual

Culligan knows the more informed you are about your water treatment systems, the more confident
you will be about its performance. It's because of this and more than seventy years of commitment to
customer satisfaction that Culligan is providing this Performance Data Sheet to its customers.
IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit
with your actual water treatment needs. It is recommended that before purchasing a water treatment
unit, you have your water supply tested to determine your actual water treatment needs.
MANUFACTURER: Culligan International Company,
9399 W. Higgins Rd., Suite 1100, Rosemont, IL 60018 USA
1-800-CULLIGAN or 1-847-430-2800
PRODUCT: Culligan Medallist Plus Series
TESTING CONDITIONS & RESULTS:
Flow Rate: 10 gpm @ 15 psi
Pressure: 30 - 40 psi
Acidity:
Non-Corrosive
Temperature: 68° (20°C)
SOFTENER SPECIFICATIONS:
Maximum Flow Rate: 10 gpm (34 Lpm)
Operating Temperature Range: 33 - 120° F (1 - 50°C)
Operating Pressure Range: 20-125 psi (140-860 kPa)
USEPA Maximum
Name of
Contaminant
Substance
Level
Barium 2.0 mg/L
Radium 226/228 5 pCi/L
This system is certified for barium and radium 226/228 reduction based on hardness reduction. It is
recommended you test your water every 6 months to ensure the system is performing properly and that hardness,
and therefore barium and radium 226/228, are being reduced. Hardness test strips have been included.
Additional strips are available from your local Culligan dealer.
The Culligan Medallist Plus Series
Standard 44 for the effective reduction of hardness (calcium and magnesium) and barium/radium as verified and
substantiated by test data.
The Culligan Medallist Plus Series
Standard 61 for material requirements.
Refer to the Specifications, Familiarization and Warranty section of this Owner's Guide for more specific product
information. To avoid contamination from improper handling and installation, your system should only be installed
and serviced by your Culligan Man. Performance will vary based on local water conditions. The substances
reduced by this system are not necessarily in your water.
Culligan water softeners are designed to work with any salt of good quality, although it is recommended that you
ask your local Culligan Man for his suggestion on the best type and grade of salt to use in this softener.
NOTICE: This softener is not intended to be used for treating water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
Buyer Signature _________________________________________________ Date
Seller Signature _________________________________________________ Date
Capacity: 17,172 grains @ 4.0 lb. salt
23,664 grains @ 8.0 lb. salt
27,700 grains @ 12.0 lb. salt
pH: 7.6
Pressure Drop at Maximum Flow Rate: 15 psi (109 kPa)
Maximum Drain Flow Rate: 1.7 gpm (6.4 Lpm)
Oper. Press. Range(Canada): 20-90 psi (140-620 kPa)
pH
7.5 + 0.5
7.5 + 0.5
®
30 Water Softeners are tested and certified by WQA against NSF/ANSI
® 30 Water Softeners are tested and certified by WQA against NSF/ANSI
®
30 Water Softener with Time Clock
Flow Rate
10.0 gpm
10.0 gpm
________________
________________
Performance
Data Sheet
Pressure
15 (psig)
15 (psig)
32