Useful Notes; Troubleshooting - Oppo udp-203 User Manual

Useful Notes


In order to prolong the life of your player, it is recommended that you wait at least 30 seconds
before you power it on after switching it off.

Remove discs and turn the power off after operation.

Some functions of the player may not be applicable to certain discs.

Some discs with special features may not be fully supported by the player. This is not a malfunction
of the unit.

In the case of player malfunction, please turn it off, wait for 30 seconds and turn it back on. If the
problem still exists, please follow the troubleshooting instructions or contact an OPPO service
center.

Troubleshooting

Use this chart to resolve general operational problems. If there are any problems that you cannot resolve,
please contact your OPPO service center.
Symptom Possible Cause
Audio cable is not properly
connected
Mute is activated
Volume is too low
SACD is played and the
No sound
audio connection is coaxial
or optical digital audio
DVD-Audio is played and
the audio connection is
coaxial or optical digital
audio
Video cable is not properly
connected
TV input is not correctly
selected
No picture
"Pure Audio" mode
engaged
Video output format is not
supported by the TV
Solution
Check audio cable, and then reconnect if
necessary.
Press the MUTE button to cancel the mute.
Press the VOL+ button to increase the volume to
100.
This is not supported due to copyright restrictions
of SACD. Please use the analog or HDMI audio
output. Alternatively, you may set SACD Priority
to CD mode and the player will play the CD layer.
This is not supported due to copyright restrictions
of DVD-Audio. Please use the analog or HDMI
audio output. Alternatively, you may switch to the
DVD-Video playback mode.
Check video cable; reconnect if necessary.
Select the input to which the player is connected.
Press the PURE button to cancel this mode.
Select a proper output resolution that is
supported by your TV.
76
Reference
Page
12–16
25
25
16, 57
16, 57
12–14
35
54