Back Side; Battery Installation; Using The Remote Control - Oppo udp-203 User Manual

I N T R O D U C T I O N

Back Side

Battery Installation

1. Remove the battery
compartment cover

Using the Remote Control

When using the remote control, the front window of the remote control should be pointed to the infrared sensor
on the front panel within an angle of ± 30° and a range of about 26 ft.
1. Index Finger Notch 1: When your index finger is
placed at this notch while holding the remote control,
your thumb is within easy reach of the navigation
buttons (ARROW, ENTER, TOP MENU and POP-UP
MENU).
2. Index Finger Notch 2: When your index finger is
placed at this notch while holding the remote control,
your thumb is within easy reach of the playback
control buttons (STOP, PLAY, PAUSE, PREV, NEXT,
REV, FWD).
3. Battery Cover: Remove to replace batteries or set
remote code.
4. Batteries: Use 2 AA or LR6 batteries.
5. Remote Code Switch: Adjust the position of the
switch to set the remote control to use the indicated
remote code (see details on page 10).
2. Insert batteries
9
3. Replace the battery
compartment cover