Field Service Ver. 1.0 Jun. 2008
3.3.11
Take-up motor (M1)
1. Remove the ADF scanner assy.
See P.17
[2]
[2]
3.3.12
Transport motor (M2)
1. Remove the front cover.
See P.12
[3]
Y109850-7
[1]
[3]
A0EYF2C032DA
[1]
A0EYF2C033DA
[2]
[1]
A0EYF2C034DA
Service Manual
2. Remove two screws [1], disconnect
the connector [2] and remove the
take-up motor assy [3].
3. Remove two screws [1], and remove
the take-up motor [2].
2. Disconnect the connector [1] and
remove two screws [2], and remove
the print lamp board mounting plate
[3].
3. Other
25