Windows 7 Professional For Embedded Systems Sp1 - Dell Embedded Box PC 3000 Installation And Operation Manual

LAN network configuration
1. Click Start and type Network in the search box.
2. Click Network and Sharing Center from the search result.
The Network and Sharing Center window appears.
3. From the left panel, click Change adapter settings.
WLAN network configuration
1. Click Start and type Network in the search box.
2. Click Network and Sharing Center from the search result.
The Network and Sharing Center window appears.
3. From the left panel, click Change adapter settings.
Bluetooth configuration
1. Click Start and type Bluetooth in the search box.
2. Click Change Bluetooth settings from the search result.
The Bluetooth Settings dialog box appears.
DW5580 network configuration
Follow the Service Manual to install and configure the DW5580 module and the corresponding carrier SIM card for the system.
Once the module and the SIM card are installed, follow these steps to connect and disconnect from WWAN.
1. Click Start and type Network in the search box.
2. Click Network and Sharing Center from the search result.
The Network and Sharing Center window appears.
3. From the left panel, click Change adapter settings.
4. Locate the required WWAN connection.
5. Right-click the WWAN connection, and then select Connect or Disconnect to connect to or disconnect from the WWAN
adapter, respectively.
Common port mappings
Serial port mapping
The following table shows the serial port mapping at the bottom of the Embedded Box PC 3000 with the Dell factory installed
Windows 7 Professional SP1 OS image.
Table 1. Serial port mapping
Number
1
2
3

Windows 7 Professional for Embedded Systems SP1

Overview
The Embedded Box PC is shipped with Windows 7 Professional for Embedded Systems. For more information, see
www.microsoft.com/windowsembedded/en-us/windows-embedded-enterprise-7.aspx.
Port Type
RS232/485
Multi-function port
(RS232/422)
RS232/485
Connector
DB9
7-in-1 cable
DB9
Device Node
COM1
COM2
COM3
https://
19