Fujitsu AS*7A Technical Manual page 20

Auto - Restart Enable (default)
Auto - Restart Disable
Remote - Controller Code-A (default)
Remote - Controller Code-B
Remote - Controller Code-C
Remote - Controller Code-D
Confirm the remote controller's "CODE CHANGE Switch"
selection and printed wiring board setting.
· If these are not confirmed, the remote controller cannot be
operated for the air conditioner.
1.4.2 COMPENSATION (HEATING CORRECTION COEFFICIENT)
ON
OFF
Compensation
°
2 C
°
0 C
°
2 C
°
4 C(default)
The function of DIP1 does not work on AS and AB models.
Turn the DIP1 off anytime.
JM1
Disconnect
Connect
JM2
Connect
Disconnect
Connect
Disconnect
DIP2 DIP3 Application (AB model only)
ON OFF
OFF ON
OFF OFF
ON ON
JM3
Connect
Connect
Disconnect
Disconnect
CODE CHANGE Switch
for floor console
for under ceiling
– 19 –