Connecting A Bluetooth Headset; Unpairing From A Bluetooth Device - HTC 10 User Manual

153 Wireless sharing

Connecting a Bluetooth headset

You can listen to music over a Bluetooth A2DP stereo headset, or have hands-free conversations
using a compatible Bluetooth headset.
Before you connect your headset, make it discoverable so HTC 10 can find it. Refer to your
headset manual for details.
1. Turn Bluetooth on and check the list of available devices.
See Turning Bluetooth on or off
2. If you don't see your headset listed, tap Scan for devices to refresh the list.
3. Tap the name of your headset in the Available Devices section. HTC 10 pairs with the headset
and the headset connection status is displayed in the Paired Devices section.
4. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
When the Bluetooth headset is connected, you'll see
Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC 10, and then
turning on the headset.
However, you might have to connect manually if your headset has been used with another Bluetooth
device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. Tap the headset's name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
If you still cannot reconnect to the headset, follow the instructions in
device on page 153, and then follow the steps under

Unpairing from a Bluetooth device

1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. In the Paired devices section, tap
3. Tap Unpair.
on page 152.
in the status bar.
on page 152.
Connecting a Bluetooth headset
on page 152.
next to the device to unpair.
Unpairing from a Bluetooth
on page 153.