Mercedes-Benz C-CLASS CABRIOLET Operator's Manual page 204

Menus and submenus
202
Assistance submenu
Deactivating/activating ESP
Observe the "Important safety notes" section in
the description of ESP
G
WARNING
If you deactivate ESP
bilizes the vehicle. There is an increased risk
of skidding and an accident.
Only deactivate ESP
bed in the following.
It may be best to deactivate ESP
ing situations:
when using snow chains
R
in deep snow
R
on sand or gravel
R
Deactivating/activating ESP
AMG vehicles (
Y
For further information about ESP
( page 67).
Y
Start the engine.
X
Press the ò button on the steering wheel
X
to open the menu list.
Press : or 9 on the steering wheel to
X
select the Settings
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
sist submenu.
Press a to confirm.
X
Press : or 9 to select ESP.
X
Press a to confirm.
X
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
If the å warning lamp in the instrument
cluster lights up when the vehicle is ready to
®
drive, ESP is deactivated.
If the ÷ and å warning lamps light up
continuously, ESP
function.
Observe the information on warning lamps
( page 240).
Y
Observe the information on display messages
( page 210).
Y
®
®
( page 67).
Y
® ®
, ESP no longer sta-
®
in the situations descri-
®
in the follow-
®
in Mercedes-
page 69).
®
, see
menu.
DriveAs‐
®
is not available due to a mal-
Activating/deactivating COLLISION PRE-
VENTION ASSIST PLUS
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
submenu.
Press a to confirm.
X
Press 9 or : to select
X
Prevention.
Press a to confirm.
X
The current selection appears.
To activate/deactivate: press a again.
X
When COLLISION PREVENTION ASSIST PLUS
is deactivated, the æ symbol appears in
the multifunction display in the
Graphic menu.
For further information about COLLISION PRE-
VENTION ASSIST PLUS, see (
Activating/deactivating PRE-SAFE
Brake
®
PRE‑SAFE Brake is only available for vehicles
with the Driving Assistance package.
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
submenu.
Press a to confirm.
X
Press : or 9 to select
X
Brake.
Press a to confirm.
X
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
®
When PRE-SAFE Brake is deactivated, the
æ symbol appears in the multifunction dis-
play in the Assistance Graphic
For more information on PRE‑SAFE
( page 71).
Y
Settings menu.
DriveAssist
Collision
Assistance
page 65).
Y
®
Settings menu.
DriveAssist
PRE-SAFE
menu.
®
Brake, see