Answer A Call When In A Call; Answer Calls Automatically - Polycom realpresence trio 8800 User Manual

Polycom RealPresence Trio Solution User Guide
Incoming Call screen
Your system administrator can enable the screen to flash bright orange when you have an incoming
call. The screen continues to flash until the incoming call is displayed in the Home or Calls screen. For
more information about this feature, see your system administrator.
To answer an incoming call:
» Tap Answer
After you answer the incoming call, the call becomes active.
If the system is locked, you must enter a user password before answering the call. See the section
Answer Calls on a Locked

Answer a Call When in a Call

When you are in an active call and an incoming call arrives on the same or a different line, a call waiting tone
beeps, and the Incoming Call window is displayed.
To answer an incoming call during a call:
» Tap Answer
The active call is placed on hold, and the incoming call becomes active.

Answer Calls Automatically

You can set up the system to automatically answer calls using the Auto Answer feature. When this feature
is enabled, the system automatically answers all incoming calls using the speakerphone. Your system
administrator sets how many times the system rings before the call is automatically answered.
When Auto Answer is enabled and you receive an incoming call while in a call, the incoming call is not
answered until you end or hold the current call.
Polycom, Inc.
.
System.
.
23