Samsung VP-L100 Service Manual page 49

Alignment and adjustment
8. Pre white balance (II)
1) Camera ÒE-EÓ, 3100¡K gray-scale chart.
2) Video(output) jack and AF MICOM.
4) Connect vectorscope input jack to video(output)
jack.
3) Press the ÒMENU (MODE UP)/DATE
(MODE DOWN)Ó button so that the OSD state is
Ò1D CWBB XX XXÓ.
5) Aim the camera at a 3100¡K gray-scale chart
illuminated at 1500 to 2000 lx.
6) Adjust the Ò DISPLAY (DATA UP)/ C.RESET
(DATA DOWN)Ó button so that the white vector
moves to the R-Y axial on screen of the vectorscope.
7) The OSD shows ÒOK!Ó.
Match the white luminance
point with the
black luminance
point
9. R-Y Positive Gain
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video(output) jack to waveform monitor
input jack and monitor TV jack respectively.
4) Press the ÒMENU (MODE UP)/DATE
(MODE DOWN)Ó button so that the OSD state is
Ò32 CRGP XX XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lx.
6) Adjust the Ò DISPLAY (DATA UP)/C.RESET(DATA
DOWN)Ó button so that the red level is 70IRE.
7) Be sure to press the ÒTITLE (CONFIRM)Ó
button to memorize setting.
8) The OSD shows ÒOK!Ó.
5-28
10. R-Y Negative Gain
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video(output) jack to waveform monitor
input jack and monitor TV jack respectively.
4) Press the ÒMENU (MODE UP)/DATE
(MODE DOWN)Ó button so that the OSD state is
Ò33 CRGN XX XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lx.
6) Adjust the Ò DISPLAY (DATA UP) /C.RESET(DATA
DOWN)Ó button so that the cyan level is 65IRE.
7) Be sure to press the ÒTITLE (CONFIRM)Ó
button to memorize setting.
8) The OSD shows ÒOK!Ó.
11. B-Y Positive Gain
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video(output) jack to waveform monitor
input jack and monitor TV jack respectively.
4) Press the ÒMENU (MODE UP)/DATE
(MODE DOWN)Ó button so that the OSD state is
Ò36 CBGP XX XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lx.
6) Adjust the Ò DISPLAY (DATA UP)/C.RESET
(DATA DOWN)Ó button so that the blue level is
50IRE.
7) Be sure to press the ÒTITLE (CONFIRM)Ó
button to memorize setting.
8) The OSD shows ÒOK!Ó.
70IRE
65IRE
50IRE
Samsung Electronics