Lighting Instructions - Napoleon MIRAGE 605 Manual

6

Lighting Instructions

WARNING!
WARNING!
Main Burner
1. Open grill lid.
2. Push and turn any main burner
knob slowly to the 'hi' position. This
action will ignite the pilot flame
which will in turn light the selected
burner. If the pilot lights, continue to
push down on the control knob until
the burner lights and then release.
3. If the pilot does not ignite, then
immediately turn the control knob
back to the 'off position and repeat
step 2 several times.
4. If the pilot and burner will not
ignite within 5 seconds, turn the
control knob to the 'off' position and
wait 5 minutes for any excess gas to
dissipate. Either repeat steps 2 and 3
or light with a match.
5. If lighting the unit with a match,
clip the match into the supplied
lighting rod. Hold the lit match down
through the grill and sear plate while
turning the corresponding burner
valve to high.
WARNING!
www.napoleongrills.com
Lights Left Burner Rear Burner
Open lid.
Ensure all burner controls are in the off position. Turn on the gas supply valve.
Lighting
3. Push and turn the rotisserie burner
control knob slowly to the 'hi' position.
This action will ignite the pilot flame,
which will in turn light the burner. If
. the pilot lights, continue to push down
on the burner control knob until the
4. If the burner does not ignite, then
immediately turn the control knob back
to the 'off' position and repeat step 3
5. If the burner will not ignite within
5 seconds, turn the control knob to
the 'off' position and wait 5 minutes
for any excess gas to dissipate. Either
repeat steps 3 and 4 or light with a
Do not use the rear burner (rotisserie burner) with the main burners operating.
Centre Burner Right Burner
Rear Burner Lighting
(Rotisserie Burner)
1. Open grill lid.
2. Remove the warming rack.
burner lights then release.
several times.
match.
Side Burner
Infra Red Burner
Off Position
Side Burner Lighting
(If equipped)
1. Open side burner cover.
2. Push and turn the side burner control
knob slowly to the
'hi' position. This action will ignite
the side burner.
3. If the burner does not ignite, then
immediately turn the control knob back
to the 'off' position and repeat step 2
several times.
4. If the burner will not ignite within 5
seconds, turn the control knob to the 'off'
position and wait 5 minutes for any excess
gas to dissipate. Either repeat steps 2 and
3 or light with a match.