Napoleon MIRAGE 605 Manual page 16

16
6 x N570-0080 (#14 x 1/2")
3/8"(10mm)
4. Rear Cart Panel Installation
Fit rear cart panel between the two end panels; ensure large hole in panel is to the bottom right corner as illustrated. Fasten
using (6) #14 x 1/2" screws, three on each side.
5. Condiment Basket
Rotate basket slightly to allow wire to enter the holes in the side panel. Push through and upwards, rotating to allow the
bend in the wire to pass through the holes. Lay basket flat against the side panel.
www.napoleongrills.com