Polishing And Waxing - Volvo S90 Owner's Manual

MAINTENANCE AND SERVICE
||
Related information
•
Polishing and waxing (p. 542)
•
Wiper blades in service position (p. 520)
•
Automatic braking when stationary (p. 406)
•
Using the parking brake (p. 403)
•
Gear positions for automatic gearbox
(p. 386)
542

Polishing and waxing

Polish and wax the car if the paintwork is dull or
to give the paintwork extra protection. The car
does not need to be polished until it is at least
one year old. However, the car can be waxed
during this time. Do not polish or wax the car in
direct sunlight.
Wash and dry the car thoroughly before you
begin polishing or waxing. Clean off asphalt and
tar stains using tar remover or white spirit. More
stubborn stains can be removed using fine rub-
bing paste designed for car paintwork.
Polish first with a polish and then wax with liquid
or solid wax. Follow the instructions on the pack-
aging carefully. Many preparations contain both
polish and wax.
IMPORTANT
Avoid waxing and polishing on plastic and
rubber.
When using degreasant on plastic and rubber,
only rub with light pressure if it is necessary.
Use a soft washing sponge.
Polishing glossy trim mouldings could wear
away or damage the glossy surface layer.
Polishing agent that contains abrasive must
not be used.
IMPORTANT
Only paint treatment recommended by Volvo
should be used. Other treatment such as pre-
serving, sealing, protection, lustre sealing or
similar could damage the paintwork. Paint-
work damage caused by such treatments is
not covered by Volvo warranty.
Related information
•
Cleaning the exterior (p. 540)
•
Paint damage (p. 545)