Samsung R60 NP-R60FY series Service Manual page 79

- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area
Main
System
Picture Description
28. Remove Mainboard from right side as
like picture.
* Caution
If lift up from left side, that may cause
crash of some ports
29. Bottom after removing the Main Board.
30. Remove 7pcs screws to disassemble
Heat Pipe and MDC.
- M2 L4 : 1pcs
- Special Screw : 6pcs
31. Turn screw like a picture and lift up the
CPU.
* Caution
Be care of not to bend CPU Pin.
4-7