Hunter Key Biscayne Owner's Manual page 15

Switch Housing & Light Kit (continued)
Empty
Post
Partially install three light kit assembly
screws, found in the
into the posts as shown, leaving the
circled post empty.
Use only the light kit supplied with
this fan model.
Light Kit
Assembly
Screw
Connect the plugs from the upper and lower
switch housings. Make sure to line up the
hardware bag,
colored markings on the connectors.
M3556-01 • 06/17/14 • © Hunter Fan Company
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
15
www.HunterFan.com
Keyhole
Slot
Align the three keyhole slots in the
light kit with the three assembly screws
in the posts. Lift the light kit and twist
clockwise to lock it into place. Be sure
that both pull chains are hanging freely.
1.888.830.1326