Hunter Key Biscayne Owner's Manual page 13

Switch Housing & Light Kit www.HunterFan.com
1.888.830.1326
Red Flag
Remove and discard the plastic
Remove the pre-installed light kit Carefully remove the light kit from the
connectors from the ends of the
assembly screw and red flag from the
upper switch housing and set the light
two pull chains.
light kit assembly. Save the screw. It will kit aside.
be needed for light kit installation.
Note: The screw was installed for
shipping purposes only.
13
M3556-01 • 06/17/14 • © Hunter Fan Company