Status Indicators - Paradyne COMSPHERE 3800PLUS User Manual

COMSPHERE 3800Plus Modems
3811 Plus Faceplate and Shared Diagnostic
Control Panel (SDCP)
The shared diagnostic control panel (SDCP) is used to
manage carrier-mounted 3811Plus modems. Use the
SDCP to issue commands to view and select configuration
options on, or to monitor tests for, a specific 3811Plus
modem.
The faceplate of the 3811Plus contains LED status
indicators that monitor the operation of the modem. After
the SDCP is connected to the modem, the Front Panel
indicator of the selected modem lights to show that the
modem is connected.
Figure 4-2 shows the SDCP and the shared diagnostic
unit (SDU) it interfaces with.
Status
Diag
Diag
SDU
SDU
SELECT
KEY
NETWORK
Figure 4-2. Optional SDCP, 3811 Plus Faceplate, and Optional SDU
4-2
Status
OK Pwr
Alrm Alrm
In 142 Test
Out Dial
125
RI
Busy
Serv
SQ
103 TXD
104 RXD
105 RTS
106 CTS
107
DSR
108 DTR
109 LSD
Front Panel
Spkr
3811 Plus
CARRIER SLOTS 1–16
1 2 3 4 5 6
Select
OK Alarm BckUp Test EC
STATUS
INDICATORS
OK Alarm BckUp Test EC
DEVICE
ALARM
DIAL
TEST
BACKUP
MODE

Status Indicators

The status indicators on a 3800Plus modem
continuously provide information on the modem's
operating condition. All of the status indicators on the
3810Plus modem are on the DCP
the status indicators for the carrier-mounted 3811Plus
modem are located on its faceplate, the SDCP, and the
SDU faceplate (Figure 4-2).
The standalone 3810Plus modem's DCP has 13 LEDs,
and the carrier-mounted 3811Plus has 16 LEDs. These
LEDs are listed and described in
to one model type have the appropriate model number
shown in the table.
7 8 9 10 11 12 13
F1 F2 F3
KEYPAD
ERROR
CORRECTION
October 1998
(Figure 4-1), whereas
Table 4-1; LEDs specific
14 15 16
COMSPHERE 3000
496-14487-01
LCD
3980-A2-GB30-40