Default Configuration Options - Paradyne COMSPHERE 3800PLUS User Manual

Default Configuration Options

Overview
Table G-1 lists all default configuration options for the
main four factory preset configurations. (Additional
configuration options set by the optional Cellular (Mobile)
Configuration Option
DTE INTERFACE
Async/Sync Mode
Async DTE Rate
# Data Bits
Parity Bit
# Stop Bits
DTR Action
DSR Control
RTS Action
CTS Control
RTS/CTS Delay
LSD Control
TX Clock Source
CT111 Rate Control
DTE Rate = VF Rate
1
UNIX Dial default setting only.
3980-A2-GB30-40
Table G-1
(1 of 5)
Factory Default Configuration Options
Async Dial and UNIX
Dial Default Settings
Async
19,200 bps
8
None
1
Ignore
Forced ON
Ignore
Forced On
1
Wink When Disc
0 msec
Standard RS232
1
Wink When Disc
N/A
Disable
Disable
October 1998
and Cellular (PSTN) factory preset configurations are
listed under the &F5 and &F6 commands
AT Command Set and S-Registers.) An N/A indicates that
the value for this configuration option does not appear on
the LCD if that factory default configuration is selected.
Sync Dial
Default Settings
Sync
N/A
N/A
N/A
N/A
Standard RS232
Standard RS232
Standard RS232
Standard RS232
0 msec
Standard RS232
Internal
Disable
Disable
G
in Chapter 13,
Sync Leased Answer/
Originate Mode
Default Settings
Sync
N/A
N/A
N/A
N/A
Ignore
Standard RS232
Standard RS232
Standard RS232
0 msec
Standard RS232
Internal
Disable
Disable
G-1