Increasing The Number Of End-User Systems - Paradyne Hotwire ReachDSL 6350-A4 Installation Instructions Manual

To improve data transmission throughput and minimize background noise during a
telephone conversation, make sure that:
T
The Hotwire 6350 ReachDSL Modem is always powered on, even when not in use,
and
T
A Hotwire phone filter is installed on every telephone on the same line as the
Hotwire 6350 ReachDSL Modem (see

Increasing the Number of End-User Systems

A single end-user system is attached to the Hotwire 6350 ReachDSL Modem by using
an Ethernet crossover cable. To increase the number of end-user systems, connect all
the PCs to an Ethernet hub using a straight-through cable.
The Hotwire ReachDSL/MVL port card supports 32 hosts/subnets per DSL port and the
Hotwire ReachDSL Modem supports up to 256 MAC entries.
Phone Filter on page 3).
10