5. Insert the supplied power cord's round end into the jack labeled POWER. Plug the
transformer into an AC outlet.
Power
Jack
Transformer
or
01-17010
The ReachDSL modem hardware installation is now complete. When the power cord is
installed, the ReachDSL modem goes through a power-on self-test.
Power-On
When power is applied, the ReachDSL modem performs self-diagnostics and the PWR
LED is on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on
for one second.
Power – green
Alarm – red
Test – yellow
DSL Line – green
Transmit/Receive – green
Ethernet Link – green
PWR
ALM
TST
LINE
TX/RX
ETHERNET
ReachDSL
01-17003
7