Table of Contents
Advertisement
VC720520MUK Rev1.qxp_Instruction Booklet 07/04/2016 11:41 Page 7
Using in upright steam cleaning mode
IMPORTANT: Before use, hardfloors should be thoroughly swept and carpets should be thoroughly dry
vacuumed. However, we recommend that your steam cleaner is not used on:
•
bare wooden floors or any surfaces where wood is exposed (as it will absorb moisture and may distort).
•
damaged hardfloors or hardfloors with gaps present (as it will absorb moisture and may distort).
•
if unsure, always contact floor manufacturer to confirm if the floor can be cleaned with a steam cleaner.
Also, do not keep your steam cleaner in one place for an extended period, because the continual heat
may cause damage to carpets and laminate flooring.
Please disconnect and allow the unit to cool before changing the cloth and attachments.
Attach the microfibre floor cloth
floorhead (23). Align the grip pads on the cloth
to the corresponding pads on the underside of
the floorhead.
WARNING: Before switching ON, ensure the
floorhead is located safely away from persons or
animals.
Plug in at the mains outlet and switch on your
steam cleaner at the On/Off power switch (16). The
temperature indicator light
heat up and illuminate steady blue when the steam
is ready.
1
(25)
to the
3
(8)
will flash red during
Rotate the upper cord storage hook
quickly release the power cord (12).
You may rotate the upper cord storage hook
back upwards to enable you to loop any excess
power cord over it.
Place the floorhead
(23)
on the floor. Hold the
floorhead to the floor with your foot and tilt the
main body
(21)
back.
To emit steam, press the steam trigger
underside of the handle (3). To prevent
over-saturation of the floor, operate the steam
trigger intermittently (especially on hard floors).
2
(4)
to
4
(2)
on the
7
Advertisement
Table of Contents
