Figure 14 Mstr Block On Modsoft Screen With I/O Labels - Black & Decker d984 Installation Manual

Elements Edit
Go/Srch Network
F3-F4-F5-F6-
Figure 14 MSTR Block on Modsoft screen With Input/Output Labels
a The top node (40100 in the example) defines the first of a nine register block
that contains:
4-m-r Operation Type
4-m-T+1 Error Status
4TTTT+2
Pattern
1
4ll-l-r+3 Pattern 2
4-m-l-+4 Pattern 3
FFFF Hex Change Address Command
See Appendix C for Error Codes
1234 Hex
5678 Hex
XXAA Hex where xx = 00 for builtin
01 for 5985 #I
02 for S985 #2
4TTTT+5 Pattern 4
4lll-T+6
Pattern 5
4TTTT+7 Pattern 6
4l-TTT+8 Pattern 7
XXBB Hex
XXCC Hex
XXDD Hex
XXEE Hex
When the Error output passes power, the content of the Error Status register con-
tains an error code to help you determine the cause of the error.
These registers provide a margin of safety against inadvertent change of address.
The values in these seven registers MUST contain exactly the above data or an
error will result.
o The middle node (40200 in the example Figure 14) contains the new address.
The new address can be a value between
1
and 64.
36 System Planning
GhWB84-EDK