Table of Contents
Advertisement
en | 3 2 | User guide | CP9680 AutoScanner® Plus
ABS TPS B(%)
MIL STATUS
Throttle Position B
If the
icon displays while a PID is selected press
to view graph. Press
Screen.
Refer to "View Entire List." on page 4-19 for instructions
on how to select PIDs to graph and how to view graph.
5.
Return to Select Data to View Menu.
•
Press
.
6.
Return to Datastream Menu.
•
Press
.
5.7
Record Data
The Record Data function records PIDs while vehicle is
parked or being driven. The Record Data function is
mainly used for diagnosing intermittent driveability
problems that cannot be isolated by any other method.
The recording time varies. A recording consists of frames
of data before the trigger and several frames after the
trigger.
CAUTION
Two people must be in vehicle when driving.
One to drive and the other to operate the
scan tool.
From Datastream Menu:
1.
Select Record Data.
•
Use the
UP and
Data is highlighted.
•
Press
.
Datastream
View Data
Record Data
Component Locator
Acronyms
Review Data
Print Data
Code Lookup
System Setup
2.
Follow all instructions on display.
•
The Scan Tool can maintain 5 recordings per
vehicle. If there are already 5 recordings stored,
the Scan Tool will ask which recording to over-
write.
•
Scan tool validates list of global PIDs from
vehicle.
573102 | REV. A | 07.2015
0.0
Off
to Return to PID
DOWN keys until Record
Validating PIDs
Validating PID List
PID 116/329
Please Wait
3.
Refer to View Data to setup Custom List or View
Entire List and Pre-Trigger Setup to set the number
of frames to keep prior to triggering the recording.
Select Data to Record
Entire Data List
Custom Data List
Pre-Trigger Setup
4.
Press
to begin recording.
•
Data continues to be saved until either:
–
Record memory is full.
–
Operator presses
•
Scan tool recording times vary. A recording
consists of frames of data before trigger and
several frames after trigger.
Recording
Collecting pretrigger data
Press ENTER to trigger
recording
Recording
Collecting data for frame #4
Press ENTER to end recording
5.
After recording, scan tool displays a prompt to
Playback Data.
•
Select NO to return to Datastream Menu.
•
Select YES to display recorded data.
•
Refer to "Recording" on page 17 for instruc-
tions on how to play back data.
.
Bosch Automotive Service Solutions Inc.
Advertisement
Table of Contents
