Table of Contents
Advertisement
en | 1 8 | User guide | CP9680 AutoScanner® Plus
ABSLT TPS(%)
CALC LOAD(%)
COOLANT(°F)
ENG SPEED(RPM)
FUEL SYS 1
FUEL SYS 2
IAT(°F)
IGN ADV(°)
LT FTRM1(%)
Frame:
0
Throttle position
–
If graphing is available for selected PID, the
"
" icon is located on the side of the
screen.
–
Press
–
Use the
to highlight the second PID to graph
and then press the
select. A maximum of two PIDs can be
graphed. Press
•
The triangle below the graph indicates the
position of the frame in the graph.
–
Use the
LEFT and
scroll back and forth through graph.
–
Use the
UP and
back and forth between PIDs.
•
Different vehicles communicate at different
speeds and support a different number of PIDs.
Therefore, the maximum number of frames that
can be recorded varies.
Select PIDs to Graph
ABSLT TPS(%)
✓CALC LOAD(%)
COOLANT(°F)
ENG SPEED(RPM)
IAT(°F)
MAF(LB/M)
MAP("HG)
VEH SPEED(MPH)
Calculated Engine Load
CALC LOAD(%)
19.4
17.5
Frame:
21
3.
Return to Review Data menu.
•
Press
.
573102 | REV. A | 07.2015
0.0
3.5
95
692
OPEN
OPEN
75
4.5
3.1
Time: 0.0
to select PIDS to graph.
UP and
DOWN arrow keys
RIGHT arrow to
to see graph.
RIGHT arrow keys to
DOWN keys to toggle
19.2
Time:
26.8
Print Data
The Print Data function allows the printing of diagnostic
information stored in the Scan Tool.
•
The Scan Tool's internal battery power can be
used to print data.
•
Use the Print Data function to turn On/Off
printing vehicle information prior to printing
data.
•
Make sure you have previously installed the PC
software in Download Scanning Suite.
•
Launch Scanning Suite and then start printing
application.
•
Follow all instructions on PC.
1.
Select Print Data.
•
Use the
UP and
Data is highlighted.
•
Press
.
Main Menu
Vehicle Diagnostics
Acronyms
Review Data
Print Data
Code Lookup
System Setup
Print Data
Launch PC printing software
application.
Press ENTER to continue
•
On the Print Data menu, Print All prints all data
collected by the Scan Tool.
Print Data
✓Print All
✓I/M Monitiors
✓DTCs (Codes)
State OBD Check
Recording
View Freeze Data
O2 Monitor Tests
Diagnostic Monitor Tests
Vehicle Information
•
When printing a Recording, Start Frame and End
Frame need to be defined.
2.
Select Data to Be Printed.
DOWN keys until Print
Bosch Automotive Service Solutions Inc.
Advertisement
Table of Contents
