Teledyne LeCroy
Yellow
Red
Blue
Figure 1.3: LEDs
1.6.1
Status and Configuration Display
The Analyzer front LCD display indicates the configuration and status of operations. For
example, during initialization, the LCD panel displays boot status messages.
1.6.2
Temperature and Humidity
The hardware should operate flawlessly in the following temperature ranges:
The hardware should operate in the following humidity range:
1.7
Installing Your Analyzer
1.7.1
Software Installation
The SAS and SATA software works on systems using the Windows® XP, Windows 7 (x86,
x64) Windows 8 (x86, x64), Windows Server 2003, Windows Server 2008 and Windows
Server 2012 R2 operating systems. 64‐bit Windows OS is recommended because it allows
using more RAM memory. Other Operating Systems limit the RAM to 3GB.
1. Insert the Installation DVD‐ROM into the DVD drive
2. The installation automatically starts setup, unless Auto Run is off. In that case, select
3. After the warning to close all other programs and before starting the installation,
20
6.0G
On
This LED is illuminated when a link is established.
This LED illuminates when an error occurs.
This LED is illuminated when a trigger occurs.
Operating 0 °C to 55 °C (32 °F to 131 °F)
Non‐Operating ‐20 °C to 80 °C (‐4 °F to 176 °F)
10% to 90% RH (non‐condensing)
the DVD‐ROM from "My Computer" and click Setup.
the Install component selection opens.
On
on the host machine.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Installing Your Analyzer