Step - ParaBody 893104 Assembly Instructions Manual

FIGURE 6
12

STEP 6:

• Attach six 3-1/4 X 1-3/4" GLIDES (26) to the LEFT & RIGHT SAFETY RAILS (11 & 12) as shown in FIGURE 6, using the
following steps:
• Thoroughly clean all surfaces where the 3-1/4 X 1-3/4" GLIDES (26) are to be attached.
• Remove the 3-1/4 X 1-3/4"" GLIDES (26) from the paper backing and firmly apply them flush with all shown surfaces.
• Attach two 13-1/2 X 1-5/8" RUBBER STRIPS (25) to the LEFT & RIGHT SAFETY RAILS (11 & 12) as shown in FIGURE 6.
FIGURE 7
STEP 7:
• Assemble the LEFT & RIGHT SAFETY RAILS (11 & 12) to the FRONT UPRIGHTS (5) as shown in FIGURE 7.
12
25
11
12
11
7
26
5