ParaBody 893104 Assembly Instructions Manual page 13

20
FIGURE 16
STEP 16:
• Slide two 1 X 8" GRIPS (20) on the LOW ROW BAR (10) and two 1 X 8" GRIPS (20) on the LAT BAR (9) as shown in FIGURE 16.
• Attach the LAT BAR (9) to the ball end of the upper CABLE (18) using one 5/16" SNAP HOOK (47) as shown in FIGURE 16.
• Attach the LOW ROW BAR (10) to the ball end of the lower CABLE (18) using one 12-LINK CHAIN (49) and two 5/16" SNAP
HOOKS (47) as shown in FIGURE 16.
• If the PEC DEC ATTACHMENT will not be assemble at this time, eight 9/16" CAP PLUGS (29) have been supplied to plug exposed
holes on the UPRIGHT FRAME (2) as shown in FIGURE 16.
Thank you for purchasing the Parabody 893104 PRO SYSTEM. If unsure of proper use of equipment, call
your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.
18
47
9
47
20
10
29
18
47
49
13
2