Rinnai infinity 32 HD 250 E User Manual page 6

New Zealand has a service and
spare parts network in all areas.
Our Service network personnel are fully trained and equipped to
give the best service on your Rinnai appliance. If your appliance
needs service, please ring the 0800 Rinnai service contact
number on the back of this booklet. Rinnai recommend that this
appliance should be serviced every 3 years.
This appliance shall be installed in accordance with:
Manufacturer's Installation Instructions.
•
Current AS/NZS 3500.4
•
Current AS/NZS 3000
•
Local Water Authority Regulations.
•
Local Gas Fitting Regulations.
•
Municipal Building Codes.
•
NZS 5261 Gas Appliance Installation Code.
•
Any other relevant Statutory Regulations.
•
This Infinity must be installed correctly by an authorized person. The installation
of gas, water, and electricity must conform to local regulations.
The installation must also comply with the instructions supplied by Rinnai.
Your heater has been approved by the Australian Gas Association
A.G.A. Approval Number shown on Data plate.
Please keep this instruction booklet in a safe place for future reference.
All dimensions referred to in these instructions are in millimeters, unless otherwise
specified.
N10378
IMPORTANT
- 5 -
Distributed and Serviced in Australia under
a Quality system certified as complying with
ISO 9002 by Standards Australia Quality
Assurance Services