Rinnai infinity 32 HD 250 E User Manual page 25

OPERATION WITH DELUXE BATHFILL TEMPERATURE
Using the Infinity with 3 Deluxe Bathfill Temperature Controllers
(
Not available for use with Infinity 24 models)
When 2 or 3 Temperature Controllers are used for the Infinity, there must be one MC-70-2A
(Kitchen) and two BC-70-2A (Bathroom).
AM
Transfer
0 0 0 0
Ho t wa ter
tem p.
Clock Hour Min.
Cooler Hotter
Sound
ON/OFF
Vol.
M C -7 0 - 1 A
Switching the System On
The hot water system and three controllers can be switched on and off from any controller by
pressing the 'ON/OFF' button as shown. When the system is turned on, the monitors will be lit.
During normal operation the system is left on.
C
AM
Transfer
0 0 0 0
Ho t wa ter
tem p.
Clock Hour Min.
Cooler Hotter
Sound
ON/OFF
Vol.
M C -7 0 -1 A
Setting the clock
See page 21 for details on setting the clock.
Setting the Sound Volume
See page 22 for details on setting the sound volume.
Using Hot Water
The hot water delivery temperature can be controlled from either the Kitchen Controller (MC-70-2A)
or Bathroom Controllers (BC-70-2A). See pages 21 to 22 for details on setting the hot water delivery
temperature for the Kitchen and Bathroom Controllers.
Shower Saver Bath Fill Function
See pages 22 to 24 for details on the Shower Saver / Bath fill function. With two or more Bathroom
Controllers fitted (one in each bathroom) only one bath can be filled at a time.
CHECK WATER TEMPERATURE BEFORE USE.
A parent should always check the temperature before a child is placed in contact with hot water
CAUTION
When any hot water tap is open, temperature cannot be adjusted except between 37°C and 43°C.
For safety reasons, temperature 'priority' cannot be transferred between controllers when a hot
water tap is open
NOTE
Repeat the relevant procedures above for the third (Bathroom) Controller.
CONTROLLERS
- 24 -
.